Home News

China Zhenan Metallurgy Co., Ltd company news

All Products

Ferro Silicon Alloy
(259)

Ferro Silicon Powder
(18)

Ferro Silicon Slag
(36)

Silicon Metal
(219)

Ferro Silicon Magnesium
(30)

Ferro Silicon Barium
(16)

Silicon Manganese
(16)

Ferro Manganese
(99)

Magnesium Metal Ingot
(88)

Carbon Ferro Chrome
(54)

Silicon Carbide Powder
(153)

Calcium Silicon Alloy
(19)

Ferro Titanium
(44)

Ferro Vanadium
(159)

Aluminum Wire
(20)

Zinc Wire
(91)

Refractory Materials
(15)

Ladle Refractory Materials
(15)

Recarburizer
(45)

Refractory Brick
(18)

Refractory Castable
(14)

Titanium Products
(17)

Graphite Electrode
(103)

I'm Online Chat Now

Company News

Methods and types of surface protective coatings for titanium rods

[2024-03-01 16:15:27]

The surface of titanium rods and titanium alloy rods has poor abrasion resistance. Especially in sliding conditions, titanium surfaces in contact with each other or with other metals can be quickly welded together, and even in the case of light loads and small relative movements, the entire surface ... Read More

How to use titanium rod filter correctly

[2024-03-01 16:06:50]

How to use titanium rod filter correctly? 1, when used for the first time, it is best to use a brush with a little soft soap or laundry detergent to gently brush and clean the internal and external surfaces of the filter, and then rinse it with tap water and distilled water in turn, fill in the ... Read More

TC4 titanium alloy bar rolling process research

[2024-03-01 16:01:45]

Titanium alloy material is characterized by high specific strength, high flexural strength ratio, high deformation resistance, excellent process plasticity and superplasticity, and its bar products are widely used in various fields of national economy, and there are rivets connectors made of ... Read More

Performance and main applications of TC4 titanium plate

[2024-03-01 15:53:57]

TC4 titanium alloy has poor stamping properties and good thermoplasticity. Various forms of welding can be performed, and the strength of the welded joint can reach 90% of the strength of the base metal. The machining performance is still good, requiring the use of carbide tools, large cutting speed... Read More

Introduction of titanium alloy deep hole threading technology

[2024-03-01 15:54:37]

Deep hole threading of special material parts can be difficult. For example, deep hole tapping on a titanium part is very challenging. It is very uneconomical to scrap a part that is near completion due to the scraping action created by a broken tap. Therefore, in order to avoid scraping, the ... Read More

Commonly used methods for surface polishing of titanium rods

[2024-03-01 15:38:04]

In the production of titanium rods, due to differences in materials and processes, we often need to perform surface treatment on some TC series titanium rods. 1. Fine grinding That is, conventional various types of emery rubber wheels are used to grind the surfaces of titanium and titanium... Read More

Ferrosilicon: How to prepare it?

[2024-02-06 14:17:40]

1. Weighing is accurate. All materials must be weighed according to the specified quantity, and the error must be small. If the weighing is inaccurate, it will be difficult to control the furnace conditions, and even scrap products may be produced. Therefore, you must be careful in batching work, ... Read More

How to add materials when smelting ferrosilicon?

[2024-02-06 14:16:58]

1. Each batch of materials must be mixed evenly before being added to the furnace. No random addition is allowed. As we all know, the proportion of each batch of materials is calculated based on the chemical reaction principle of ferrosilicon smelting and the composition of the raw materials used, ... Read More

Ferrosilicon smelting operations: segregation and pulverization

[2024-02-06 14:16:26]

The temperature of the molten iron coming out of the furnace is usually 300 to 350°C higher than the melting point of ferrosilicon, so the molten iron condenses slowly. During the slow condensation process, pure silicon with a small density floats up, and the dense iron silicide sinks, that is, ... Read More

Ferrosilicon smelting operations: finishing and warehousing

[2024-02-06 14:15:46]

Finishing must be carried out in strict accordance with national standards. Ferrosilicon should be delivered in blocks. The supplier can use lime powder or graphite slurry as the ingot mold coating. The thickness of the coating attached to the ferrosilicon product shall not exceed 1 mm. There must ... Read More

Page 32 of 64|< << 27 28 29 30 31 32 33 34 35 36 >> >|