Good Quality Used in Steel Making Titanium Iron FTi35, FTi35, FeTi70% Ferro Titanium
ferrotitanium
Analysis of Factors Affecting Ferrotitanium Smelting
Abnormal Phenomena in Ferrotitanium Smelting
Moisture in the charge causes boiling, uneven gas escape, and excessive material ejection. The use of magnesite containing moisture for sand holes can also lead to material ejection.
Non-uniform mixing of the charge results in uneven smelting.
Low unit heat input leads to slow reactions, prolonged smelting time, insufficient reductant, low heat generation, or low preheating temperature of the charge, resulting in a cold process. This can cause excessive slag adhesion at the bottom of the ingot, high iron content in the slag, poor fusion of the ingot, looseness, or slag inclusions.
High unit heat input or high preheating temperature results in violent reactions, slag agitation, slag splashing, hard and difficult-to-break ingots, high aluminum content in the ingots, and reduced yield.
Specifications
| Ferro titanium specification |
| Grade |
Ti |
Al |
Si |
P |
S |
C |
Cu |
Mn |
| FeTi30-A |
25-35 |
8.0 |
4.5 |
0.05 |
0.03 |
0.10 |
0.2 |
2.5 |
| FeTi30-B |
25-35 |
8.5 |
5.0 |
0.06 |
0.04 |
0.15 |
0.2 |
2.5 |
| FeTi40-A |
35-45 |
9.0 |
3.0 |
0.03 |
0.03 |
0.10 |
0.4 |
2.5 |
| FeTi40-B |
35-45 |
9.5 |
4.0 |
0.04 |
0.04 |
0.15 |
0.4 |
2.5 |
| FeTi70-A |
65-75 |
3.0 |
0.5 |
0.04 |
0.03 |
0.10 |
0.2 |
1.0 |
| FeTi70-B |
65-75 |
5.0 |
4.0 |
0.06 |
0.03 |
0.20 |
0.2 |
1.0 |
| FeTi70-C |
65-75 |
7.0 |
5.0 |
0.08 |
0.04 |
0.30 |
0.2 |
1.0 |
| Size |
10-50mm
60-325mesh
80-270mesh & customerize size |
Packing & Delivery
Packing: 1 ton big bag, 20-25mt in 20' container
Company Profile
ZHENAN has been in the business of ferroalloy for 30 years now. It is a leading manufacturer and supplier of ferro silicon,silicon manganese,silicon metal,silicon carbide,high carbon silicon and so on.our company is a large-sized production enterprise integrating research, development, production and sales.
Our Services
Q:Can we visit your factory ?
A:Warmly welcome once we have your schedule we will pick you up .
Q: Do you have quality control?
A: Yes, we have gained BV, SGS authentication.
Q: How long is your delivery time?
A: Generally it is 7-14 days if the goods are in stock. or it is 25-45 days if the goods are not in stock, it is according to
quantity.
Q:Can we get the some samples?Any charges?
A: Yes , we could offer the sample for free charge but do not pay the cost of freight . If you place the order after confirm the sample , we will refund your express freight or deducte it from the order amount .
Your message must be between 20-3,000 characters!
