Home News

China Zhenan Metallurgy Co., Ltd company news

All Products

Ferro Silicon Alloy
(169)

Ferro Silicon Powder
(18)

Ferro Silicon Slag
(36)

Silicon Metal
(169)

Ferro Silicon Magnesium
(30)

Ferro Silicon Barium
(16)

Silicon Manganese
(16)

Ferro Manganese
(63)

Magnesium Metal Ingot
(58)

Carbon Ferro Chrome
(54)

Silicon Carbide Powder
(66)

Calcium Silicon Alloy
(19)

Ferro Titanium
(31)

Ferro Vanadium
(61)

Aluminum Wire
(20)

Zinc Wire
(22)

Refractory Materials
(15)

Ladle Refractory Materials
(15)

Recarburizer
(35)

Refractory Brick
(18)

Refractory Castable
(14)

Titanium Products
(17)

Graphite Electrode
(103)

I'm Online Chat Now

Company News

TC4 titanium alloy pipes performance characteristics

[2024-03-01 16:33:06]

1, high strength - titanium alloy density is generally in 4.5g/cm3 or so, only 60% of steel, pure titanium strength is close to the strength of ordinary steel, some high-strength titanium alloys more than many alloy structural steel strength. At present, the aircraft engine components, skin, ... Read More

Main applications of TC4 and TA1 titanium alloys in the aerospace industry

[2024-03-01 16:23:07]

Titanium alloy has high strength and low density, good mechanical properties, toughness and corrosion resistance is very good. In addition, titanium alloys have poor process performance, cutting and processing difficulties, in hot processing, very easy to absorb impurities such as hydrogen, oxygen, ... Read More

Precautions for drawing titanium rods

[2024-03-01 16:19:12]

There is no clear boundary between titanium rods and titanium wire, often called titanium rods with thick diameter and not too long length; thin diameter and long length, rolled called titanium wire. Titanium tubes and rods of titanium process and titanium wire is largely similar, much the same, but ... Read More

Methods and types of surface protective coatings for titanium rods

[2024-03-01 16:15:27]

The surface of titanium rods and titanium alloy rods has poor abrasion resistance. Especially in sliding conditions, titanium surfaces in contact with each other or with other metals can be quickly welded together, and even in the case of light loads and small relative movements, the entire surface ... Read More

How to use titanium rod filter correctly

[2024-03-01 16:06:50]

How to use titanium rod filter correctly? 1, when used for the first time, it is best to use a brush with a little soft soap or laundry detergent to gently brush and clean the internal and external surfaces of the filter, and then rinse it with tap water and distilled water in turn, fill in the ... Read More

TC4 titanium alloy bar rolling process research

[2024-03-01 16:01:45]

Titanium alloy material is characterized by high specific strength, high flexural strength ratio, high deformation resistance, excellent process plasticity and superplasticity, and its bar products are widely used in various fields of national economy, and there are rivets connectors made of ... Read More

Performance and main applications of TC4 titanium plate

[2024-03-01 15:53:57]

TC4 titanium alloy has poor stamping properties and good thermoplasticity. Various forms of welding can be performed, and the strength of the welded joint can reach 90% of the strength of the base metal. The machining performance is still good, requiring the use of carbide tools, large cutting speed... Read More

Introduction of titanium alloy deep hole threading technology

[2024-03-01 15:54:37]

Deep hole threading of special material parts can be difficult. For example, deep hole tapping on a titanium part is very challenging. It is very uneconomical to scrap a part that is near completion due to the scraping action created by a broken tap. Therefore, in order to avoid scraping, the ... Read More

Commonly used methods for surface polishing of titanium rods

[2024-03-01 15:38:04]

In the production of titanium rods, due to differences in materials and processes, we often need to perform surface treatment on some TC series titanium rods. 1. Fine grinding That is, conventional various types of emery rubber wheels are used to grind the surfaces of titanium and titanium... Read More

Ferrosilicon: How to prepare it?

[2024-02-06 14:17:40]

1. Weighing is accurate. All materials must be weighed according to the specified quantity, and the error must be small. If the weighing is inaccurate, it will be difficult to control the furnace conditions, and even scrap products may be produced. Therefore, you must be careful in batching work, ... Read More

Page 20 of 53|< << 15 16 17 18 19 20 21 22 23 24 >> >|