Home Cases

Company Cases

All Products

Ferro Silicon Alloy
(209)

Ferro Silicon Powder
(18)

Ferro Silicon Slag
(36)

Silicon Metal
(174)

Ferro Silicon Magnesium
(30)

Ferro Silicon Barium
(16)

Silicon Manganese
(16)

Ferro Manganese
(89)

Magnesium Metal Ingot
(78)

Carbon Ferro Chrome
(54)

Silicon Carbide Powder
(86)

Calcium Silicon Alloy
(19)

Ferro Titanium
(44)

Ferro Vanadium
(98)

Aluminum Wire
(20)

Zinc Wire
(51)

Refractory Materials
(15)

Ladle Refractory Materials
(15)

Recarburizer
(35)

Refractory Brick
(18)

Refractory Castable
(14)

Titanium Products
(17)

Graphite Electrode
(103)

I'm Online Chat Now

Company Cases

Ferro molybdenum supplier

2023-01-04 14:36:01

Molybdenum belongs to the rare metal group. Molybdenum and its alloys are widely used in various fields of engineering and industry, but the main consumption is ferrous metallurgy -7080% of molybdenum is used in the production of alloy steel. Molybdenum can improve the hardenability and mechanical ...
Silicon barium calcium deoxidizer

2022-12-31 14:35:08

Silicon barium calcium is a kind of compound deoxidizer, which not only has a good deoxidizing effect in iron and steel smelting, but also has a certain function of purifying molten steel. Silicon and barium in silicon, barium and calcium can react with oxygen to form oxide impurities, which float ...
High carbon silicon characteristics

2023-01-09 14:31:24

1. Excellent cycle rate of Si by composite deoxidizer Si and C 2. High purity due to high content of Si and C (at least 80%) 3. With high carbon content, it has excellent heating effect 4. Reduced working hours 5. Easy to control carbon content 6. Improve the quality of molten steel, improve product ...
graphite powder manufacturer

2023-01-11 14:27:00

Graphite powder soft, black gray; Greasy feeling, can pollute the paper. The hardness is 1~2, and it increases to 3~5 with the increase of impurity along the vertical direction. The specific gravity was 1.9~2.3. Under the condition of oxygen isolation, its melting point is above 3000℃, and it is one ...
Classification and role of ferrotitanium

2023-01-17 14:25:05

The main composition of ferrotitanium is titanium and iron ferroalloy. It also contains impurities such as aluminum, silicon, carbon, sulfur, phosphorus and manganese. There are mainly three varieties according to titanium content: FeTi30 (containing Ti25.0%~35.0%, Al < 8.5%, Si < 5.0%), FeTi40 ...
silicon carbide production process

2022-12-30 14:22:15

In metallurgical production, we often see silicon carbide resistance with green silicon carbide and black silicon carbide two different colors of silicon carbide, today to introduce two different colors of silicon carbide production mode: green silicon carbide and black silicon carbide production ...
How to adjust the amount of inoculant?

2023-01-08 14:17:05

(1) the inoculant addition of nodular cast iron is generally more than that of gray cast iron. (2) if the hot metal after inoculation treatment is poured in for a long time, due to the decrease of inoculation amount, the addition amount should be increased. (3) chilling is easy to occur in thin...
Advantages of silicon briquette

2023-01-06 14:15:10

Compared with traditional ferroalloy materials, silicon briquette has many advantages. In the steelmaking process, silicon can isolate the oxygen in the molten steel and deoxidize it. Therefore, silicon briquette 65 has good deoxidization performance. At the same time, it also has the advantages of ...
Silicon briquette Advantages

2023-01-03 14:12:54

Silicon briquette Advantage: 1) efficient initiating of smelting process in steelwork furnaces; 2) convenient and less expensive substitute to standard Ferro Silicon; 3) suitability of mixing with different materials according to customers' needs and requirements; 4) compression of pure material in ...
Electrolytic Manganese Metal Manufacturer

2023-01-02 14:03:14

The purity of electrolytic manganese metal sheet is very high, and its function is to increase the hardness of metal materials, the most widely used are mn-Cu alloy and mn-Al alloy. Manganese can improve the strength, toughness, wear resistance and corrosion resistance of these alloys. Manganese and ...

36 37 38 39 40 41 42 43