It is difficult to distinguish the quality of ferroalloy silicon-barium inoculants. These methods are very effective!
| Model | Size (mm) | Si | Ba | Ca | Re |
| Ba3-65 | 0.5-2.0 | 60-65 | 2-4 | 0.5-2.5 | - |
| Ba5-60 | 2-5 | 55-60 | 4-6 | 0.5-2.5 | - |
| BaRe5-60.5 | 3-8 | 55-60 | 4-6 | 0.5-2.5 | 4-6 |
| Ba10-55 | 0.2-3 | 50-55 | 8-12 | 3.5-5.5 | - |
| 2-8 | |||||
| Ba15-50 | 0.2-3 | 45-50 | 13-17 | 3.5-5.5 | - |
| 2-8 | |||||
| Ba20-45 | 0.2-3 | 40-45 | 18-20 | 3.5-5.5 | - |
| 2-8 | |||||
| Ba3-50 | 0.2-3 | 46-54 | 1.5-4 | 1-3 | 3-5 |
| 2-8 | |||||
| Si72 | 0.3-2 | 70-72 | 1-3 | - |
Method 1 Temperature when producing silicon-barium inoculants
When we buy silicon-barium inoculants, we must pay attention to those products that have been treated with high temperature, because such products will be better, mainly because the speed is very fast during the absorption and dissolution process, which can effectively reduce the increase in energy.
Method 2: Pay attention to the content of S and N in silicon-barium inoculants
When we choose silicon-barium inoculants, we should pay attention to the detection of S and N content. The performance of silicon-barium inoculants with low content is more stable. If the content is high, it will cause defects in thick walls.
Method 3: Choose the appropriate size of silicon-barium inoculants
When purchasing silicon-barium inoculants, we should choose products that suit us according to the size, which will increase the absorption efficiency of silicon-barium inoculants.